Collections
Filter

Weight

Rated Flow

Power Off Position

Connector

Input Signal

Lap Condition

Seal Material

Fluid Type

Enable Mode

S10 Pro Directive Drive Servo Valve

The Domin S10 Pro is a single-stage DDV which combines high flow, excellent dynamics, strong chipshear, and low power consumption.

A single-stage valve has the advantage of being able to position the spool independent of supply pressure and without wasting high-pressure fluid.

The S10 Pro has been designed to sustain high bandwidth operation at exceptional flows without significant limitation of operating pressures or duty cycles.

Please browse our range below, if you have any specific adjustments or customisations you want, then please contact us direct by email or through the chat.

Showing products 1 - 9 of 36
View

S10 Pro Flow 110-250 Lap 0-5 4-20mA E N Red Oil Centre EPDM

Weight: 1500 g, Rated Flow: 110-250 lpm, Power Off Position: Centre, Connector: EN 175201-804 6 + PE, Input Signal: 4-20mA, Lap Condition: 0-5 %, Seal Material: EPDM, Fluid Type: Red Oil, Enable Mode: No

£2,049 ex VAT
Delivery: 10-14 weeks Configure and buy

S10 Pro Flow 110-250 Lap 0-5 4-20mA E N Red Oil Centre NBR

Weight: 1500 g, Rated Flow: 110-250 lpm, Power Off Position: Centre, Connector: EN 175201-804 6 + PE, Input Signal: 4-20mA, Lap Condition: 0-5 %, Seal Material: NBR, Fluid Type: Red Oil, Enable Mode: No

£2,049 ex VAT
Delivery: 10-14 weeks Configure and buy

S10 Pro Flow 110-250 Lap 0-5 4-20mA E N Red Oil Centre Viton

Weight: 1500 g, Rated Flow: 110-250 lpm, Power Off Position: Centre, Connector: EN 175201-804 6 + PE, Input Signal: 4-20mA, Lap Condition: 0-5 %, Seal Material: Viton, Fluid Type: Red Oil, Enable Mode: No

£2,049 ex VAT
Delivery: 10-14 weeks Configure and buy

S10 Pro Flow 110-250 Lap 0-5 4-20mA E N Skydrol Centre EPDM

Weight: 1500 g, Rated Flow: 110-250 lpm, Power Off Position: Centre, Connector: EN 175201-804 6 + PE, Input Signal: 4-20mA, Lap Condition: 0-5 %, Seal Material: EPDM, Fluid Type: Skydrol, Enable Mode: No

£2,049 ex VAT
Delivery: 10-14 weeks Configure and buy

S10 Pro Flow 110-250 Lap 0-5 4-20mA E N Skydrol Centre NBR

Weight: 1500 g, Rated Flow: 110-250 lpm, Power Off Position: Centre, Connector: EN 175201-804 6 + PE, Input Signal: 4-20mA, Lap Condition: 0-5 %, Seal Material: NBR, Fluid Type: Skydrol, Enable Mode: No

£2,049 ex VAT
Delivery: 10-14 weeks Configure and buy

S10 Pro Flow 110-250 Lap 0-5 4-20mA E N Skydrol Centre Viton

Weight: 1500 g, Rated Flow: 110-250 lpm, Power Off Position: Centre, Connector: EN 175201-804 6 + PE, Input Signal: 4-20mA, Lap Condition: 0-5 %, Seal Material: Viton, Fluid Type: Skydrol, Enable Mode: No

£2,049 ex VAT
Delivery: 10-14 weeks Configure and buy

S10 Pro Flow 110-250 Lap 0-5 4-20mA E Y Red Oil Centre EPDM

Weight: 1500 g, Rated Flow: 110-250 lpm, Power Off Position: Centre, Connector: EN 175201-804 6 + PE, Input Signal: 4-20mA, Lap Condition: 0-5 %, Seal Material: EPDM, Fluid Type: Red Oil, Enable Mode: Yes

£2,049 ex VAT
Delivery: 10-14 weeks Configure and buy

S10 Pro Flow 110-250 Lap 0-5 4-20mA E Y Red Oil Centre NBR

Weight: 1500 g, Rated Flow: 110-250 lpm, Power Off Position: Centre, Connector: EN 175201-804 6 + PE, Input Signal: 4-20mA, Lap Condition: 0-5 %, Seal Material: NBR, Fluid Type: Red Oil, Enable Mode: Yes

£2,049 ex VAT
Delivery: 10-14 weeks Configure and buy

S10 Pro Flow 110-250 Lap 0-5 4-20mA E Y Red Oil Centre Viton

Weight: 1500 g, Rated Flow: 110-250 lpm, Power Off Position: Centre, Connector: EN 175201-804 6 + PE, Input Signal: 4-20mA, Lap Condition: 0-5 %, Seal Material: Viton, Fluid Type: Red Oil, Enable Mode: Yes

£2,049 ex VAT
Delivery: 10-14 weeks Configure and buy

S10 Pro Flow 110-250 Lap 0-5 4-20mA E N Red Oil Centre EPDM

S10Pro 250 U0 4-20mA C E N R E

Connector:EN 175201-804 6 + PE , Enable Mode:No , Fluid Type:Red Oil , Input Signal:4-20mA , Lap Condition:0-5 , Power Off Position:Centre , Rated Flow:110-250 , Seal Material:EPDM , Weight:1500 .

£2,049 ex VAT
Delivery: 2-3 weeks

S10 Pro Flow 110-250 Lap 0-5 4-20mA E N Red Oil Centre NBR

S10Pro 250 U0 4-20mA C E N R N

Connector:EN 175201-804 6 + PE , Enable Mode:No , Fluid Type:Red Oil , Input Signal:4-20mA , Lap Condition:0-5 , Power Off Position:Centre , Rated Flow:110-250 , Seal Material:NBR , Weight:1500 .

£2,049 ex VAT
Delivery: 2-3 weeks

S10 Pro Flow 110-250 Lap 0-5 4-20mA E N Red Oil Centre Viton

S10Pro 250 U0 4-20mA C E N R V

Connector:EN 175201-804 6 + PE , Enable Mode:No , Fluid Type:Red Oil , Input Signal:4-20mA , Lap Condition:0-5 , Power Off Position:Centre , Rated Flow:110-250 , Seal Material:Viton , Weight:1500 .

£2,049 ex VAT
Delivery: 2-3 weeks

S10 Pro Flow 110-250 Lap 0-5 4-20mA E N Skydrol Centre EPDM

S10Pro 250 U0 4-20mA C E N S E

Connector:EN 175201-804 6 + PE , Enable Mode:No , Fluid Type:Skydrol , Input Signal:4-20mA , Lap Condition:0-5 , Power Off Position:Centre , Rated Flow:110-250 , Seal Material:EPDM , Weight:1500 .

£2,049 ex VAT
Delivery: 2-3 weeks

S10 Pro Flow 110-250 Lap 0-5 4-20mA E N Skydrol Centre NBR

S10Pro 250 U0 4-20mA C E N S N

Connector:EN 175201-804 6 + PE , Enable Mode:No , Fluid Type:Skydrol , Input Signal:4-20mA , Lap Condition:0-5 , Power Off Position:Centre , Rated Flow:110-250 , Seal Material:NBR , Weight:1500 .

£2,049 ex VAT
Delivery: 2-3 weeks

S10 Pro Flow 110-250 Lap 0-5 4-20mA E N Skydrol Centre Viton

S10Pro 250 U0 4-20mA C E N S V

Connector:EN 175201-804 6 + PE , Enable Mode:No , Fluid Type:Skydrol , Input Signal:4-20mA , Lap Condition:0-5 , Power Off Position:Centre , Rated Flow:110-250 , Seal Material:Viton , Weight:1500 .

£2,049 ex VAT
Delivery: 2-3 weeks

S10 Pro Flow 110-250 Lap 0-5 4-20mA E Y Red Oil Centre EPDM

S10Pro 250 U0 4-20mA C E Y R E

Connector:EN 175201-804 6 + PE , Enable Mode:Yes , Fluid Type:Red Oil , Input Signal:4-20mA , Lap Condition:0-5 , Power Off Position:Centre , Rated Flow:110-250 , Seal Material:EPDM , Weight:1500 .

£2,049 ex VAT
Delivery: 2-3 weeks

S10 Pro Flow 110-250 Lap 0-5 4-20mA E Y Red Oil Centre NBR

S10Pro 250 U0 4-20mA C E Y R N

Connector:EN 175201-804 6 + PE , Enable Mode:Yes , Fluid Type:Red Oil , Input Signal:4-20mA , Lap Condition:0-5 , Power Off Position:Centre , Rated Flow:110-250 , Seal Material:NBR , Weight:1500 .

£2,049 ex VAT
Delivery: 2-3 weeks

S10 Pro Flow 110-250 Lap 0-5 4-20mA E Y Red Oil Centre Viton

S10Pro 250 U0 4-20mA C E Y R V

Connector:EN 175201-804 6 + PE , Enable Mode:Yes , Fluid Type:Red Oil , Input Signal:4-20mA , Lap Condition:0-5 , Power Off Position:Centre , Rated Flow:110-250 , Seal Material:Viton , Weight:1500 .

£2,049 ex VAT
Delivery: 2-3 weeks

The positive impact of Domin Next Generation Products

  • 40% Fewer Parts
  • 25% Higher Flow
  • 400% Smaller
  • 200%+ Faster

Higher quality hydraulic valves and systems available at a lower price than more established units.

Find Out More

High quality, world class Hydraulics valves & systems

The Domin direct drive hydraulic servo valves use the most advanced design, analysis, test and manufacturing technologies. This enabled an innovative step change in performance of DDV technology.

The direct drive hydraulic valves use the most advanced design, analysis, test and manufacturing technologies. Giving you are greener, cleaner, efficient and reliable servo systems and valves.

Find Out More

Valve Emission Savings

1.1 Tonnes CO2

Per Valve Per Year

*  Based on a S6 Pro Valve which will save 17 tonnes of Carbon Dioxide over 15 years.

Find out More

Bespoke System,
Professionally Engineered

1. Concept Generation

The product specification is generated with customers, market analysis and engineering calculations at its core. Technology building blocks are combined to create a conceptual design. Key parts are sized, with high-level performance predictions calculated.

2. Design and simulation

Using the latest tools, the concept design is developed and matured. Simulation and analysis is used to validate the mechanical and functional performance, and electronics hardware and firmware developed to control the system.

3. Prototype Manufacture

The latest rapid manufacturing techniques are used to quickly deliver a working prototype unit, with manufacturing process development occurring in tandem in our advanced manufacturing facility.

4. Development & Validation

Prototype units go through a series of representative validation tests to characterise, optimise and validate performance, reliability and operability.

5. Industrialisation

Our focus is always on making a product that delivers real benefit in the real world, and this means focus on ability to ramp to production volume, at a cost that is commercially feasible. Our production facility delivers >20,000 parts per annum, and is constantly expanding.

The product specification is generated with customers, market analysis and engineering calculations at its core. Technology building blocks are combined to create a conceptual design. Key parts are sized, with high-level performance predictions calculated.

Using the latest tools, the concept design is developed and matured. Simulation and analysis is used to validate the mechanical and functional performance, and electronics hardware and firmware developed to control the system.

The latest rapid manufacturing techniques are used to quickly deliver a working prototype unit, with manufacturing process development occurring in tandem in our advanced manufacturing facility.

Prototype units go through a series of representative validation tests to characterise, optimise and validate performance, reliability and operability.

Our focus is always on making a product that delivers real benefit in the real world, and this means focus on ability to ramp to production volume, at a cost that is commercially feasible. Our production facility delivers >20,000 parts per annum, and is constantly expanding.

News & Innovationfrom the world of Hydraulics

Domin valves survive half a billion cycles

Domin valves survive half a billion cycles

Read More
The World's First <span>Direct to Market</span> Valve Ordering Website

The World's First Direct to Market Valve Ordering Website

Read More
<span>Additive Manufacturing</span> Fatigue Strength Quality Control

Additive Manufacturing Fatigue Strength Quality Control

Read More
<span>Aston Martin</span> Partners with Domin for a Revolutionary Take on Active Suspension

Aston Martin Partners with Domin for a Revolutionary Take on Active Suspension

Read More