Collections
Filter

Weight

Rated Flow

Power Off Position

Connector

Input Signal

Lap Condition

Seal Material

Fluid Type

Enable Mode

Hydraulic Servo Valves from Domin

Our direct drive hydraulic valve uses the most advanced design, analysis, test and manufacturing technologies. This enables an innovative step-change in the performance of DDV technology.

They set new standards in power density and dynamic performance and are simple for you to configure and purchase online. 

If you cannot find the precise solution you are looking for, please contact us as we're confident we can develop a valve to suit virtually any specification. Use the chat function below if you want to explore your needs.

Showing products 10 - 18 of 72
View

S6 Pro Flow 32-60 Lap 0-5 +/-20mA E Y Red Oil Centre Viton

Weight: 550 g, Rated Flow: 32-60 lpm, Power Off Position: Centre, Connector: EN 175201-804 6 + PE, Input Signal: +/-20mA, Lap Condition: 0-5 %, Seal Material: Viton, Fluid Type: Red Oil, Enable Mode: Yes

£1,379 ex VAT
Delivery: 10-14 weeks Configure and buy

S6 Pro Flow 32-60 Lap 0-5 +/-20mA E Y Red Oil Centre NBR

Weight: 550 g, Rated Flow: 32-60 lpm, Power Off Position: Centre, Connector: EN 175201-804 6 + PE, Input Signal: +/-20mA, Lap Condition: 0-5 %, Seal Material: NBR, Fluid Type: Red Oil, Enable Mode: Yes

£1,379 ex VAT
Delivery: 10-14 weeks Configure and buy

S6 Pro Flow 32-60 Lap 0-5 +/-20mA E Y Red Oil Centre EPDM

Weight: 550 g, Rated Flow: 32-60 lpm, Power Off Position: Centre, Connector: EN 175201-804 6 + PE, Input Signal: +/-20mA, Lap Condition: 0-5 %, Seal Material: EPDM, Fluid Type: Red Oil, Enable Mode: Yes

£1,379 ex VAT
Delivery: 10-14 weeks Configure and buy

S6 Pro Flow 32-60 Lap 0-5 +/-10V E Y Skydrol Centre Viton

Weight: 550 g, Rated Flow: 32-60 lpm, Power Off Position: Centre, Connector: EN 175201-804 6 + PE, Input Signal: +/-10V, Lap Condition: 0-5 %, Seal Material: Viton, Fluid Type: Skydrol, Enable Mode: Yes

£1,379 ex VAT
Delivery: 10-14 weeks Configure and buy

S6 Pro Flow 32-60 Lap 0-5 +/-10V E Y Skydrol Centre NBR

Weight: 550 g, Rated Flow: 32-60 lpm, Power Off Position: Centre, Connector: EN 175201-804 6 + PE, Input Signal: +/-10V, Lap Condition: 0-5 %, Seal Material: NBR, Fluid Type: Skydrol, Enable Mode: Yes

£1,379 ex VAT
Delivery: 10-14 weeks Configure and buy

S6 Pro Flow 32-60 Lap 0-5 +/-10V E Y Skydrol Centre EPDM

Weight: 550 g, Rated Flow: 32-60 lpm, Power Off Position: Centre, Connector: EN 175201-804 6 + PE, Input Signal: +/-10V, Lap Condition: 0-5 %, Seal Material: EPDM, Fluid Type: Skydrol, Enable Mode: Yes

£1,379 ex VAT
Delivery: 10-14 weeks Configure and buy

S6 Pro Flow 32-60 Lap 0-5 +/-10V E Y Red Oil Centre Viton

Weight: 550 g, Rated Flow: 32-60 lpm, Power Off Position: Centre, Connector: EN 175201-804 6 + PE, Input Signal: +/-10V, Lap Condition: 0-5 %, Seal Material: Viton, Fluid Type: Red Oil, Enable Mode: Yes

£1,379 ex VAT
Delivery: 10-14 weeks Configure and buy

S6 Pro Flow 32-60 Lap 0-5 +/-10V E Y Red Oil Centre NBR

Weight: 550 g, Rated Flow: 32-60 lpm, Power Off Position: Centre, Connector: EN 175201-804 6 + PE, Input Signal: +/-10V, Lap Condition: 0-5 %, Seal Material: NBR, Fluid Type: Red Oil, Enable Mode: Yes

£1,379 ex VAT
Delivery: 10-14 weeks Configure and buy

S6 Pro Flow 32-60 Lap 0-5 +/-10V E Y Red Oil Centre EPDM

Weight: 550 g, Rated Flow: 32-60 lpm, Power Off Position: Centre, Connector: EN 175201-804 6 + PE, Input Signal: +/-10V, Lap Condition: 0-5 %, Seal Material: EPDM, Fluid Type: Red Oil, Enable Mode: Yes

£1,379 ex VAT
Delivery: 10-14 weeks Configure and buy

S6 Pro Flow 32-60 Lap 0-5 +/-20mA E Y Red Oil Centre Viton

S6Pro 60 U0 20A C E Y R V

Connector:EN 175201-804 6 + PE , Enable Mode:Yes , Fluid Type:Red Oil , Input Signal:+/-20mA , Lap Condition:0-5 , Power Off Position:Centre , Rated Flow:32-60 , Seal Material:Viton , Weight:550 .

£1,379 ex VAT
Delivery: 2-3 weeks

S6 Pro Flow 32-60 Lap 0-5 +/-20mA E Y Red Oil Centre NBR

S6Pro 60 U0 20A C E Y R N

Connector:EN 175201-804 6 + PE , Enable Mode:Yes , Fluid Type:Red Oil , Input Signal:+/-20mA , Lap Condition:0-5 , Power Off Position:Centre , Rated Flow:32-60 , Seal Material:NBR , Weight:550 .

£1,379 ex VAT
Delivery: 2-3 weeks

S6 Pro Flow 32-60 Lap 0-5 +/-20mA E Y Red Oil Centre EPDM

S6Pro 60 U0 20A C E Y R E

Connector:EN 175201-804 6 + PE , Enable Mode:Yes , Fluid Type:Red Oil , Input Signal:+/-20mA , Lap Condition:0-5 , Power Off Position:Centre , Rated Flow:32-60 , Seal Material:EPDM , Weight:550 .

£1,379 ex VAT
Delivery: 2-3 weeks

S6 Pro Flow 32-60 Lap 0-5 +/-10V E Y Skydrol Centre Viton

S6Pro 60 U0 10V C E Y S V

Connector:EN 175201-804 6 + PE , Enable Mode:Yes , Fluid Type:Skydrol , Input Signal:+/-10V , Lap Condition:0-5 , Power Off Position:Centre , Rated Flow:32-60 , Seal Material:Viton , Weight:550 .

£1,379 ex VAT
Delivery: 2-3 weeks

S6 Pro Flow 32-60 Lap 0-5 +/-10V E Y Skydrol Centre NBR

S6Pro 60 U0 10V C E Y S N

Connector:EN 175201-804 6 + PE , Enable Mode:Yes , Fluid Type:Skydrol , Input Signal:+/-10V , Lap Condition:0-5 , Power Off Position:Centre , Rated Flow:32-60 , Seal Material:NBR , Weight:550 .

£1,379 ex VAT
Delivery: 2-3 weeks

S6 Pro Flow 32-60 Lap 0-5 +/-10V E Y Skydrol Centre EPDM

S6Pro 60 U0 10V C E Y S E

Connector:EN 175201-804 6 + PE , Enable Mode:Yes , Fluid Type:Skydrol , Input Signal:+/-10V , Lap Condition:0-5 , Power Off Position:Centre , Rated Flow:32-60 , Seal Material:EPDM , Weight:550 .

£1,379 ex VAT
Delivery: 2-3 weeks

S6 Pro Flow 32-60 Lap 0-5 +/-10V E Y Red Oil Centre Viton

S6Pro 60 U0 10V C E Y R V

Connector:EN 175201-804 6 + PE , Enable Mode:Yes , Fluid Type:Red Oil , Input Signal:+/-10V , Lap Condition:0-5 , Power Off Position:Centre , Rated Flow:32-60 , Seal Material:Viton , Weight:550 .

£1,379 ex VAT
Delivery: 2-3 weeks

S6 Pro Flow 32-60 Lap 0-5 +/-10V E Y Red Oil Centre NBR

S6Pro 60 U0 10V C E Y R N

Connector:EN 175201-804 6 + PE , Enable Mode:Yes , Fluid Type:Red Oil , Input Signal:+/-10V , Lap Condition:0-5 , Power Off Position:Centre , Rated Flow:32-60 , Seal Material:NBR , Weight:550 .

£1,379 ex VAT
Delivery: 2-3 weeks

S6 Pro Flow 32-60 Lap 0-5 +/-10V E Y Red Oil Centre EPDM

S6Pro 60 U0 10V C E Y R E

Connector:EN 175201-804 6 + PE , Enable Mode:Yes , Fluid Type:Red Oil , Input Signal:+/-10V , Lap Condition:0-5 , Power Off Position:Centre , Rated Flow:32-60 , Seal Material:EPDM , Weight:550 .

£1,379 ex VAT
Delivery: 2-3 weeks

The positive impact of Domin Next Generation Products

  • 40% Fewer Parts
  • 25% Higher Flow
  • 400% Smaller
  • 200%+ Faster

Higher quality hydraulic valves and systems available at a lower price than more established units.

Find Out More

High quality, world class Hydraulics valves & systems

The Domin direct drive hydraulic servo valves use the most advanced design, analysis, test and manufacturing technologies. This enabled an innovative step change in performance of DDV technology.

The direct drive hydraulic valves use the most advanced design, analysis, test and manufacturing technologies. Giving you are greener, cleaner, efficient and reliable servo systems and valves.

Find Out More

Valve Emission Savings

1.1 Tonnes CO2

Per Valve Per Year

*  Based on a S6 Pro Valve which will save 17 tonnes of Carbon Dioxide over 15 years.

Find out More

Bespoke System,
Professionally Engineered

1. Concept Generation

The product specification is generated with customers, market analysis and engineering calculations at its core. Technology building blocks are combined to create a conceptual design. Key parts are sized, with high-level performance predictions calculated.

2. Design and simulation

Using the latest tools, the concept design is developed and matured. Simulation and analysis is used to validate the mechanical and functional performance, and electronics hardware and firmware developed to control the system.

3. Prototype Manufacture

The latest rapid manufacturing techniques are used to quickly deliver a working prototype unit, with manufacturing process development occurring in tandem in our advanced manufacturing facility.

4. Development & Validation

Prototype units go through a series of representative validation tests to characterise, optimise and validate performance, reliability and operability.

5. Industrialisation

Our focus is always on making a product that delivers real benefit in the real world, and this means focus on ability to ramp to production volume, at a cost that is commercially feasible. Our production facility delivers >20,000 parts per annum, and is constantly expanding.

The product specification is generated with customers, market analysis and engineering calculations at its core. Technology building blocks are combined to create a conceptual design. Key parts are sized, with high-level performance predictions calculated.

Using the latest tools, the concept design is developed and matured. Simulation and analysis is used to validate the mechanical and functional performance, and electronics hardware and firmware developed to control the system.

The latest rapid manufacturing techniques are used to quickly deliver a working prototype unit, with manufacturing process development occurring in tandem in our advanced manufacturing facility.

Prototype units go through a series of representative validation tests to characterise, optimise and validate performance, reliability and operability.

Our focus is always on making a product that delivers real benefit in the real world, and this means focus on ability to ramp to production volume, at a cost that is commercially feasible. Our production facility delivers >20,000 parts per annum, and is constantly expanding.

News & Innovationfrom the world of Hydraulics

How Weight Affects Hydraulic Performance, Cost and Energy Savings

How Weight Affects Hydraulic Performance, Cost and Energy Savings

Read More
Domin valves survive half a billion cycles

Domin valves survive half a billion cycles

Read More
The World's First <span>Direct to Market</span> Valve Ordering Website

The World's First Direct to Market Valve Ordering Website

Read More
<span>Additive Manufacturing</span> Fatigue Strength Quality Control

Additive Manufacturing Fatigue Strength Quality Control

Read More